Onell 10th anniversary drop AUGUST 3rd

[kranix]

Nondescript reversible hand!

They're kinda losing me with the hand. Doesn't look very hand-like.

I was going over the image again, and here's what I wonder:

Could totally be wrong about this, but the areas in pink look to be elevated when compared to the areas in green. This makes me wonder if what we're seeing is something like a "claw." The smaller "thumb" parts are separate but are close together, with the larger "finger" parts partially tucked underneath them.

Sorry for the poor renditions of what the digits might look like unfurled, but I hope it's clear what I'm trying to get at here.

Oh man... this actually could be Villser...

I keep going back to this post and trying to make connections. There's probably a reason we didn't see that shin piece from the front...

[TJOmega]

I keep going back to this post and trying to make connections. There's probably a reason we didn't see that shin piece from the front...

I'd still really prefer a Delphi over Villser... but I can't help but notice the most consistent detail on that sketch is the center chest piece, and the fact the designs call for a hole in the chest that the part plugs into. It does look like one of the preview pieces.

So far the proto also has a lot of new details as well, the shoulder parts we just saw don't match Villser's concept designs at all and even the sides of the leg design doesn't match. At this point I'm not really sure what we're looking at, I still want to say it's a mold that could be both but that might just be my preference getting in the way.

[peterwright1234]

The croissant is way to similar to that sketch for this to not be villser. The only hope for you guys that want the delphi would be two heads or maybe a reversible torso or separate armor parts. I'd be more surprised honestly if this thing DIDN"T have at least two heads but I can't imagine that both heads would use the exact same body. I want a delphi too but I mean the villlser could end up being really cool.

[Carpy84]

Don't care what it is at this point. I'm ready to buy it based on the pieces alone.

[NoPaintRequired]

I'm interested in seeing what the torso looks like before the head. One main question I have is are we going to have the larger singular chest piece like the Travelers, Buildmen, Armorvors, and Nobotos, or are we doing multi piece torsos like the Glyans and Phaseons?

[ChristheElder]

At this point i dont trust my eyes. Parts that look like multi pieces arent. BUT, to me that new part looks like the end comes off and maybe can be swapped with the croissant piece? Not sure why it would be that way. Maybe fist with 1 part or head with the other?
Wish it was Thursday already.

[NoPaintRequired]

I'm interested in seeing what the torso looks like before the head. One main question I have is are we going to have the larger singular chest piece like the Travelers, Buildmen, Armorvors, and Nobotos, or are we doing multi piece torsos like the Glyans and Phaseons?

Ayy, got my wish



Multidirection Torso building, can't tell if this is the back or front, or even if it's upside down or not.

[ChristheElder]

I think i am now starting to see it. At least i think i know where the croissant part goes.

[Lucario]

Looks like yesterday's part will fit over the torso as a backpack/chestplate, seeing as the only logical area for a peg would be on the inner area.

[TJOmega]

Definitely looks like it's meant to be built in multiple directions... very interesting. Here's what I'm wondering, now that we have a general idea of how the torso works... where do THESE go?



Along with the piece from yesterday, I can see room for things like a chest piece (croissant), back piece, skull cap... but that would leave at least one of these parts hanging. We have a belt so there's probably not a spot on the pelvis for one of the parts. Is it possible we're looking at parts meant for two different builds? If there are two heads maybe there's more parts meant to swap up details as well, sort of building in Glyarmor playability from the start.

[Lucario]

Definitely looks like it's meant to be built in multiple directions... very interesting. Here's what I'm wondering, now that we have a general idea of how the torso works... where do THESE go?

[snip]
[snip]

Along with the piece from yesterday, I can see room for things like a chest piece (croissant), back piece, skull cap... but that would leave at least one of these parts hanging. We have a belt so there's probably not a spot on the pelvis for one of the parts. Is it possible we're looking at parts meant for two different builds? If there are two heads maybe there's more parts meant to swap up details as well, sort of building in Glyarmor playability from the start.

Maybe the head is multiple parts and one of those 'dead end' pieces goes on there?

[peterwright1234]

I think the torso just confirmed it for villser soldier. If you put the croissant on the front it looks just like the concept sketch that was linked to earlier in the thread. Still not sure about a second character though.

[kranix]

I think the torso just confirmed it for villser soldier. If you put the croissant on the front it looks just like the concept sketch that was linked to earlier in the thread. Still not sure about a second character though.

Didn't Argen give in to the Villser Virus back in the first Glyarmor drop? Maybe we'll be seeing his latest mutation as well...

[Artic_]

This torso does look strangle buildmanish. I'd love to see Argen return. Maybe with this Villser/Delphi mold it'll have an Argen alt config.

[ChristheElder]

Curious to see if the backside of the torso has multi ports. Kinda like the mushi "face". That may explain where some extra parts go depending on config.

Either way, it looks to be a very versatile figure with parts that will blend nicely across the extended glyos range. I can see this really expanding the custom builds.

[Carpy84]

I really hope there's enough to go around. Don't want these to sell out in 10 minutes or to get cart robbed. Ideally, these will be the last to sell out... But I've got a bad feeling there won't be enough.

[Lazzy Lizard]

Like every other new figure, I'm sure there will be enough to go around.

Best way to make sure is that you are there when the action starts!

=)

[ChristheElder]

Codpiece (or crotch) is up.
Now i'm not too sure about the anniversary ring being a belt. How would it fit?

[kranix]

Codpiece (or crotch) is up.
Now i'm not too sure about the anniversary ring being a belt. How would it fit?

You mean from this post?

The other item is just Michelle's new 15th anniversary ring.

Or a belt.

The diameter on that ring looks to be about the right size for the newly-revealed pelvis. Speaking of, that pelvis looks like it could snugly fit in either the top or bottom socket of yesterday's torso...

[ChristheElder]

Codpiece (or crotch) is up.
Now i'm not too sure about the anniversary ring being a belt. How would it fit?

You mean from this post?

The other item is just Michelle's new 15th anniversary ring.

Or a belt.

The diameter on that ring looks to be about the right size for the newly-revealed pelvis. Speaking of, that pelvis looks like it could snugly fit in either the top or bottom socket of yesterday's torso...

I guess so. I can kinda see it but not seeing the parts in scale keeps me guessing.

[peterwright1234]

The lower body seems to vaguely follow that concept sketch also. I hope this means were getting a pheyaos head as seen on the sketch.

[Witchwitchwitch]

The lower body seems to vaguely follow that concept sketch also. I hope this means were getting a pheyaos head as seen on the sketch.

While a lot of us are drooling for the spare Delphi head...Pheyaos would be a welcome surprise! I hope you're right!

[ChristheElder]

The lower body seems to vaguely follow that concept sketch also. I hope this means were getting a pheyaos head as seen on the sketch.

While a lot of us are drooling for the spare Delphi head...Pheyaos would be a welcome surprise! I hope you're right!

That really would be awesome. Glyarmors come with 3 heads. Villser/Delphi/Pheyaos trio would be insane.
Less than 36 hours to go. Will we break the internet again?? Lol

[Witchwitchwitch]

Villser/Delphi/Pheyaos trio would be insane.
Less than 36 hours to go. Will we break the internet again?? Lol

That would be something else!
Also, break the internet? I hope not

[Talyn]

Definitely looks like a larger, chunkier traveler Ive been waiting for. Pretty sure that upper torso we are seeing is the bottom back, That cutout on the opposite side (front) looks like it would fit that little long 3 segmented piece. And Im pretty sure that scarf looking piece is actually a belt to make that thin waist piece look thicker. But who knows.

My guess so far.