Page 6 of 12
Re: The Communal Purist Thread! - Part I
Posted: Sun Mar 06, 2016 11:34 am
by MaxEPadd
Re: The Communal Purist Thread! - Part I
Posted: Tue Mar 15, 2016 7:31 am
by mechanicoid
Super Zeroid. It uses a whole Zeroid and Robo Force kit along with two Hub Sets and a Swing Joint set.
Re: The Communal Purist Thread! - Part I
Posted: Fri Mar 25, 2016 6:23 am
by eewk
Re: The Communal Purist Thread! - Part I
Posted: Sat Mar 26, 2016 9:16 pm
by MaxEPadd
Re: The Communal Purist Thread! - Part I
Posted: Sat Mar 26, 2016 9:33 pm
by MaxEPadd
Re: The Communal Purist Thread! - Part I
Posted: Tue Mar 29, 2016 10:20 pm
by Artic_
I have made another sin against the Glyo-Gods. Though I praise Tokusatu overlords.
I wish I had enough Roboforce to make a power ranger-esc megazord.
Re: The Communal Purist Thread! - Part I
Posted: Sun Apr 10, 2016 10:07 pm
by TJOmega
Re: The Communal Purist Thread! - Part I
Posted: Tue Apr 12, 2016 2:20 pm
by visualocity
All these Real Type release are just amazing! The Type Zero is no exception. (I hope we see Glyans and Swing Joints in this colorway too.)
Here are a couple of Type Zero Variants:
Type Zero - BulkDrive Glyarmor Type Zero - Ascension Glyarmor (A little bit of Genesis Climber Mospeada influence)
Re: The Communal Purist Thread! - Part I
Posted: Tue Apr 12, 2016 6:39 pm
by Undrave
Played around with the BioParalyzer mimic. Nothing too clever but I like the color mix:
I'm amassing quite an interesting mix of Armorvor builds.
Re: The Communal Purist Thread! - Part I
Posted: Mon Apr 25, 2016 2:22 pm
by MaxEPadd
Re: The Communal Purist Thread! - Part I
Posted: Fri Apr 29, 2016 8:10 pm
by MaxEPadd
Re: The Communal Purist Thread! - Part I
Posted: Sun May 01, 2016 9:13 am
by Artic_
I was wonder what mass of machine I could make today? End up with:
BRAVE MAXIMUS!!
Re: The Communal Purist Thread! - Part I
Posted: Sun May 01, 2016 9:13 am
by Cappy
Undrave wrote:Played around with the BioParalyzer mimic. Nothing too clever but I like the color mix:
I like it! Although I feel like he's some sort of phantam medic.
Re: The Communal Purist Thread! - Part I
Posted: Sun May 01, 2016 10:56 am
by MaxEPadd
Re: The Communal Purist Thread! - Part I
Posted: Mon May 02, 2016 5:21 pm
by Undrave
Artic_ wrote:I was wonder what mass of machine I could make today? End up with:
BRAVE MAXIMUS!!
Looks more like a miscolored Wild ZyuohKing...
Re: The Communal Purist Thread! - Part I
Posted: Mon May 02, 2016 10:08 pm
by Artic_
Undrave wrote:Artic_ wrote:I was wonder what mass of machine I could make today? End up with:
BRAVE MAXIMUS!!
Looks more like a miscolored Wild ZyuohKing...
Don't buy toys from the flea market.
Re: The Communal Purist Thread! - Part I
Posted: Thu May 05, 2016 11:00 am
by RayneGallows
I was initially going to just make a Revenant from Doom, but he became a little more stabby than missile launchy. Cobbled together a Skeleton Warrior Titan, some Robo Force and a Bio Jumper.
Re: The Communal Purist Thread! - Part I
Posted: Fri May 06, 2016 8:34 pm
by NoPaintRequired
Getter Robo 3 Concept with Zeroids, a few Robo Force bits, and Wheels
Re: The Communal Purist Thread! - Part I
Posted: Mon Jun 06, 2016 2:09 am
by Big_McLargehuge
Re: The Communal Purist Thread! - Part I
Posted: Mon Jun 06, 2016 2:13 am
by Big_McLargehuge
Sorry for the double post, but I've tried posting lots of images before, and they stop loading after around 10 or so.
I also made this Shockwave inspired build, who comes with a server robot!
Also, as I only have the Basic Cruel set, I figured I should build my own interpretation of his design while staying true to how John designed him!
Re: The Communal Purist Thread! - Part I
Posted: Sat Jun 11, 2016 6:55 am
by Big_McLargehuge
Re: The Communal Purist Thread! - Part I
Posted: Fri Jun 17, 2016 3:20 pm
by Undrave
I like the new green on the freebie Phase Arms, so I put then to use on my Cosmic Armorvor:
Re: The Communal Purist Thread! - Part I
Posted: Thu Jun 30, 2016 3:12 pm
by kranix
"Hey kranix, since it's summer again, does that mean you'll stop lurking and start posting?"
Quiet, you.Enyriun anew.I like backpacks. So, as you can probably tell, I still haven't found my camera after moving back in March, so I apologize for the photo quality. That being said, I found another excuse to tweak this guy. Now that we've wrapped up with that, onto the actually new stuff:
The MeKabuto.Scanner arm.Grabber arm.Junk in the trunk. Originally meant for combat, the MeKabuto program was scrapped once it was determined that building giant robots in the shape of a proud warrior race might be offensive to members of said proud warrior race. The program has since been modified in accordance with the Kabutos' wishes, which were to exemplify both a scientific rigor necessary to find a suitable homeworld and still be tough enough to earn a warrior's respect.Encountering an indigenous organism.Have I mentioned that I am a fan of this color scheme? So, part of why I opened with Enyriun above is because this build used a lot of the leftover parts. There are still more, of course, but so far, nothing's come of them other than tablescrap builds.
Another new friend!The Sumo Mutation. The Sumo Mutations are the latest in a line of formidable Kabuto Mushi warriors. Though powerful, their evolution has come at a cost...Viyer's latest "assistant." I remember seeing a lot of Mushi builds with Axis Joints. Here's the best I could come up with, alas.
The Hunter Strains. With Argen's defeat, the Imperium exploded in activity. Pushing Axis technology to the limit, some Gendrones began to mutate, developing more powerful forms. The Hunter Strains were some of the first, and remain some of the deadliest.Pincer variant.Grasper variant."Now, now, that's no way to get ahead..." These were fun, and again an experiment in pushing toward a more "contained" build. As a side note: it's awesome to see people have been building all this time, both here and at
Glyoverse, and inspiring at the same time. I really hope that, whatever we get in the July wave, it leads to a lot more builders coming out and showing their stuff!
Re: The Communal Purist Thread! - Part I
Posted: Sat Jul 09, 2016 8:53 pm
by MaxEPadd
I've been really lazy when it comes to posting here lately. Anyways! Here's a roboforce/zeroid build that I have been working n for a few days. It uses everyhting except for 2 pieces from 2 roboforce and 2 zeroid kits.
Re: The Communal Purist Thread! - Part I
Posted: Sat Jul 09, 2016 9:01 pm
by MaxEPadd